EasyManuals Logo

Polaris 600 INDY 2013 User Manual

Polaris 600 INDY 2013
131 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #83 background imageLoading...
Page #83 background image
79
MAINTENANCE
Hood/Side Panel
The hood and side panels of the
snowmobile protect the operator
from moving parts. Never oper-
ate a snowmobile with the hood
or side panels open or removed.
Always ensure that the hood
and side panels are securely in
place before starting the engine.
To open a side panel, rotate the
two 1/4-turn fasteners at the
upper edges of the side panel.
Release the side panel strap at
the lower edge of the panel.
To remove an open side panel,
pull the panel outward to release
the tabs at the lower edge of the
panel.
Removing the hood is not recommended. Any service requiring the
removal of the hood should be performed by an authorized POLARIS
dealer.
Strap
1/4-Turn Fasteners

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris 600 INDY 2013 and is the answer not in the manual?

Polaris 600 INDY 2013 Specifications

General IconGeneral
Displacement599 cc
Bore x Stroke77.25 mm x 64 mm
Front SuspensionPRO-RIDE
Track Width15 inches
Track Length121 inches
Cooling SystemLiquid
StarterElectric
Suspension FrontPRO-RIDE
Brake TypeHydraulic Disc
Length114 inches
Width48 inches
Track Height1.25 inches
CarburetionDual VM34 Mikuni carburetors
Height46 in. (116.8 cm)

Related product manuals