EasyManuals Logo

Polaris 600 INDY 2013 User Manual

Polaris 600 INDY 2013
131 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #84 background imageLoading...
Page #84 background image
80
MAINTENANCE
Lubrication
Rear Suspension
Lubricate the suspension pivot shafts with POLARIS Premium All Sea-
son Grease at the intervals outlined in the Periodic Maintenance Table
beginning on page 76 and before seasonal storage. When operating in
heavy, wet snow conditions, lubricate every 500 miles (800 km).
Lack of lubrication will adversely affect your ride and the life of the sus-
pension. For more information about suspension lubrication and adjust-
ments, see your POLARIS dealer.
INDY Rear Suspension (121)
Driveshaft Bearing
Inject grease into the fitting on the
speedometer sensor housing until
grease purges from the seal on the
inside of the tunnel. This should take
approximately two pumps. Do not use
more than four pumps.
X
X
X
X
Fitting

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris 600 INDY 2013 and is the answer not in the manual?

Polaris 600 INDY 2013 Specifications

General IconGeneral
Displacement599 cc
Bore x Stroke77.25 mm x 64 mm
Front SuspensionPRO-RIDE
Track Width15 inches
Track Length121 inches
Cooling SystemLiquid
StarterElectric
Suspension FrontPRO-RIDE
Brake TypeHydraulic Disc
Length114 inches
Width48 inches
Track Height1.25 inches
CarburetionDual VM34 Mikuni carburetors
Height46 in. (116.8 cm)

Related product manuals