Polaris 9919510 User Manual

1
A
B
153
ADJUSTMENTS
Rear Suspension
Compression Damping
The compression damping
clicker (1) is located on top of
the shock reservoir, under the
left rear fender.
Use a screwdriver to make
adjustments. To increase
compression damping, turn the
clicker clockwise (A). To
decrease compression
damping, turn the clicker
counter-clockwise (B).
The factory setting is at 10 clicks from fully closed.
See Suspension Settings on page 148.

Polaris 9919510 Specifications

General

Brand	Polaris
Model	9919510
Category	Offroad Vehicle
Language	English