57
FEATURES AND CONTROLS
Parking Brake
WARNING
Operating the ATV while the parking brake is engaged could result in an accident and
serious injury or death. Always check to be sure the parking brake is disengaged
before operating.
Setting the Parking Brake
1. Place the transmission in first gear or neutral.
2. Squeeze and release the brake lever (1) two or three
times, then squeeze and hold.
3. Push the park brake lock (2) forward to engage the
lock. Release the brake lever.
4. To release the parking brake lock, squeeze and release
the brake lever. It will return to its unlocked position.
1
2
To Next Page
Loading...
Need help?
General
