163
CLEANING AND STORAGE
See page 173 for the part numbers of Polaris products.
Storage Recommendations
Fog the Engine
1. Start t he engine and allow it to warm up. Turn engine off.
2. Unlatch and remove the seat.
3. Loosen the intake duct clamp at the carburetor and pull the duct off the carburetor.
4. Start the engine and spray Polaris fogging oil or a comparable product into the
carburetor, following the instructions on the fogging oil container.
5. Turn the engine off, reassemble the intake duct to the carburetor, s ecure the clamp, and
reinstall the seat.
To Next Page
Loading...
Need help?
General
