TRANSMISSION
8.9
forks’ pins disengage from the drum.
10. Remove the shift drum.
NOTE: You may have to tap the shift drum from the
backside of the case to aid in removal.
11. Remove the upper gear cluster and shift forks.
You may need to move the assembly back and
forth to aid in removal.
12. Set the upper gear cluster on a flat surface and
inspect the components.
13. Remove the shift forks from the assembly. Note
the correct position of each fork.
NOTE: The picture on the right depicts a
transmission with a “park dog” on the end of the shaft
instead of a regular “shift dog”. The transmission will
To Next Page
Loading...
