SPARK PLUG REMOVAL AND REPLACEMENT
1. Use a spark plug wrench to remove the spark plug.
2. Inspect the spark plug each time you change the oil. The electrodes should
be kept clean and free of carbon. The presence of carbon or excess oil will
reduce proper engine performance. If possible, check the spark plug gap
(area between electrodes) using a wire feeler gauge.
3. Reverse the procedure for spark plug installation. Torque to specification as
detailed in the Spark Plug Gap/Torque section.
NOTE
It is advisable to replace the spark plug at least once a year to ensure easy
starting and good engine performance.
74
MAINTENANCE
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General
