What to do if my Polaris RANGER 150 EFI 2020 Offroad Vehicle engine turns over but fails to start?
N
Nicole LesterAug 7, 2025
If your Polaris Offroad Vehicle's engine turns over but doesn't start, consider these possibilities:
* Out of fuel: Refuel your vehicle.
* Water in the fuel: Drain the fuel system and refuel with fresh fuel.
* Old or non-recommended fuel: Replace the fuel with fresh, recommended fuel.
* Fouled or defective spark plug: Inspect the spark plug and replace it if needed.
* No spark to the spark plug: Inspect the spark plug and replace it if necessary.
C
Christine HernandezAug 16, 2025
How to fix a Polaris Offroad Vehicle when the engine doesn’t turn over?
R
Raymond BarnesAug 16, 2025
If the engine of your Polaris Offroad Vehicle doesn’t turn over, check the following:
* Low battery voltage: Recharge the battery to 12.8 VDC.
* Loose battery connections: Check and tighten all battery connections.
* Loose solenoid connections: Inspect and tighten all solenoid connections.
H
heathermejiaNov 27, 2025
Why does the drive belt wear or burn on my Polaris RANGER 150 EFI 2020 Offroad Vehicle?
D
Dawn HughesNov 27, 2025
Drive belt wear or burn on your Polaris Offroad Vehicle can occur due to several reasons:
* Driving at low RPM or ground speed: Increase your speed.
* Insufficient warm-up at low ambient temperatures: Warm the engine for at least 5 minutes, applying small throttle bursts in neutral to improve belt flexibility.
* Slow clutch engagement: Use the throttle more quickly and effectively.
* Belt slippage from water or snow: Dry out the PVT system and prevent water from entering the ducts. Inspect clutch seals for damage if leaking persists.
* Clutch malfunction: Consult your Polaris dealer.
* Poor engine performance: Check for a fouled plug or foreign material in the fuel system. Your Polaris dealer can assist.
* Wrong or missing belt: Install the recommended belt.
* Improper bre...