SHOCK SPRING ADJUSTMENT
WARNING
Uneven adjustment may cause poor handling of the vehicle, which could result
in an accident. Always adjust both the left and right spring preloads equally or
have your POLARIS dealer perform the adjustments.
The front and rear shock absorber
springs are adjustable to increase or
decrease spring tension. Rotate the
adjuster
q
either clockwise or
counter-clockwise to make
adjustments.
Always apply the same adjustment
setting to all four wheels.
WHEEL TOE ALIGNMENT
1. Place machine on a smooth level surface and set steering wheel in a straight
ahead position. Secure the steering wheel in this position.
2. Place a chalk mark on the center line of the front tires approximately 10″
(25.4 cm) from the floor or as close to the hub/axle center line as possible
q
.
NOTE
It is important the height of both marks be equally positioned to get an accurate
measurement.
3. Measure the distance between the marks and record the measurement. Call
this measurement “2”.
89
MAINTENANCE
To Next Page
Loading...
Need help?
General
