What to do if Polaris ACE 150 EFI 2019 engine doesn’t turn over?
If your Polaris Offroad Vehicle's engine doesn’t turn over, it could be due to low battery voltage (recharge the battery to 12.8 VDC), loose battery connections (check and tighten all connections), or loose solenoid connections (check and tighten all connections).
Why does the Polaris ACE 150 EFI 2019 drive belt wear or burn?
Drive belt wear or burn in your Polaris Offroad Vehicle can occur due to several reasons. It may be caused by driving at low RPM or ground speed, in which case you should drive at a higher speed. Other causes include insufficient warm-up at low ambient temperatures (warm the engine at least 5 minutes, applying small throttle bursts in neutral), slow clutch engagement (use the throttle quickly), belt slippage from water or snow ingestion (dry out the PVT and prevent water entry), clutch malfunction (consult your Polaris dealer), poor engine performance (check for fouled plug or foreign material, or consult your Polaris dealer), using the wrong or missing belt (install the recommended belt), or improper break-in (always break in a new belt and/or clutch).
General| Brand | Polaris |
|---|---|
| Model | ACE 150 EFI 2019 |
| Category | Offroad Vehicle |
| Language | English |
Safety information and guidance for parents and young riders, including video recommendations.
Explanation of safety alert symbols, signal words, and prohibition/mandatory action signs.
Detailed requirements for protective gear, including helmet, eye protection, and apparel.
Key safety warnings, operating instructions, age restrictions, and prohibitions.
Warnings related to refueling, exhaust systems, unauthorized use, and equipment modifications.
Identification and location of important safety labels and warning indicators on the vehicle.
Visual identification of major vehicle components and their locations.
Procedures for seat adjustment, removal, seat belt fastening, and inspection.
How to operate the ignition, gear selector, pedals, parking brake, and speed control.
Procedures for the initial break-in period, including engine and drivetrain care.
A comprehensive checklist for inspecting the vehicle before each use for safety.
Step-by-step instructions for safely starting and stopping the vehicle's engine.
Guidance on safe driving in various conditions, including terrain, obstacles, and weather.
Explains noise, crankcase, and exhaust emission controls, including EFI.
Details on EMC compliance, potential interference, and vibration/noise measurement standards.
Outlines periodic service schedules, severe use definitions, and maintenance chart key.
Procedures for engine oil, transmission oil, brake fluid, and chain lubrication.
Maintenance tasks for spark plugs, valves, CVT, air filter, brakes, steering, and tires.
Guidance on battery maintenance, removal, installation, charging, and vehicle storage.
Detailed technical specifications including weight, dimensions, engine, and performance data.
List of Polaris-recommended lubricants, service products, and their part numbers.
Solutions for drive belt problems and engines that won't turn over or start.
Troubleshooting common engine issues like backfires, stalls, misfires, and power loss.
Details on warranty coverage, limitations, exclusions, and remedies.
Instructions on how to get warranty service, including dealer requirements and responsibilities.
To Next Page