Polaris Ranger RZR User Manual (English)

Other manuals for Polaris Ranger RZR

Owner's Manual148 pages

Use And Care56 pages

Questions and Answers:

E
Ellen WeissAug 19, 2025
What to do if my Polaris Offroad Vehicle engine runs irregularly, stalls, or misfires?
- M
  maria40Sep 12, 2025
  If your Polaris Offroad Vehicle engine runs irregularly, stalls, or misfires, it could be due to several reasons: fouled or defective spark plugs (inspect, clean, or replace the spark plugs), worn or defective spark plug wires (see your dealer), incorrect spark plug gap or heat range (set gap to specs or replace plugs), loose ignition connections (check all connections and tighten), water present in fuel (replace with new fuel), low battery voltage (recharge battery to 12.8 VDC), a kinked or plugged fuel tank vent line (inspect and replace), incorrect fuel (replace with recommended fuel), a clogged air filter (inspect and clean or replace), or other mechanical failure (see your dealer).
K
Kelly PowellAug 21, 2025
What to do if my Polaris Offroad Vehicle engine stops or loses power?
- A
  Andrew ShepherdAug 21, 2025
  If your Polaris Offroad Vehicle engine stops or loses power, it could be due to: being out of fuel (refuel), a kinked or plugged fuel vent line (inspect and replace), water in the fuel (replace with new fuel), fouled or defective spark plugs (inspect, clean, or replace spark plug), worn or defective spark plug wires (see your dealer), incorrect spark plug gap or heat range (set gap to specs or replace plug), loose ignition connections (check all connections and tighten), low battery voltage (recharge the battery to 12.8 VDC), incorrect fuel (replace with fresh recommended fuel), a clogged air filter (inspect and clean or replace), other mechanical failure (see your dealer), or an overheated engine (clean radiator screen and core, clean engine exterior, see your dealer).
D
Deanna BrownAug 23, 2025
What to do if my Polaris Offroad Vehicle engine turns over, but fails to start?
- J
  Juan WrightAug 23, 2025
  If your Polaris Offroad Vehicle engine turns over but fails to start, it could be due to several reasons: the vehicle is out of fuel (refuel), the fuel filter is clogged (see your Polaris dealer), water is present in the fuel (drain the fuel system and refuel), the fuel is old or non-recommended (replace with fresh recommended fuel), the spark plugs are fouled or defective (inspect plugs and replace if necessary), there is no spark to the spark plug (inspect plugs and replace if necessary), there is water or fuel in crankcase (immediately see your Polaris dealer), the battery voltage is low (recharge the battery to 12.8 VDC), or there is a mechanical failure (see your dealer).
W
William ThomasAug 26, 2025
What to do if my Polaris Offroad Vehicle engine doesn't turn over?
- E
  Emma KellyAug 26, 2025
  If your Polaris Offroad Vehicle engine doesn't turn over, it could be due to low battery voltage (recharge the battery to 12.8 VDC), loose battery connections (check all connections and tighten), loose solenoid connections (check all connections and tighten), or loose electronic control box connections (inspect, clean, reinstall connectors).
D
Debra SinghAug 28, 2025
What to do if my Polaris Utility Vehicle engine stops or loses power?
- C
  Christopher JonesAug 28, 2025
  If your Polaris Utility Vehicle engine stops or loses power, consider the following: * Check if you are out of fuel and refuel if necessary. * Inspect and replace any kinked or plugged fuel vent lines. * If water is present in the fuel, replace it with new fuel. * Inspect, clean, and/or replace any fouled or defective spark plugs. * Ensure that you are using fresh, recommended fuel. * Inspect and clean or replace a clogged air filter. * Recharge the battery to 12.8 VDC if the voltage is low.
J
James NguyenAug 30, 2025
What to do if my Polaris Utility Vehicle engine runs irregularly, stalls or misfires?
- L
  Lindsay KingAug 30, 2025
  If your Polaris Utility Vehicle engine runs irregularly, stalls, or misfires, here's what you can check: * Inspect, clean, and/or replace fouled or defective spark plugs. * Set the gap to specification or replace the spark plugs if the gap or heat range is incorrect. * Check all ignition connections and tighten any loose connections. * Replace the fuel if water is present. * Recharge the battery to 12.8 VDC if the voltage is low. * Inspect and replace any kinked or plugged fuel tank vent lines. * Replace with recommended fuel if the fuel is incorrect. * Inspect, clean, or replace a clogged air filter.
J
joyjonesSep 1, 2025
What to do if my Polaris Utility Vehicle engine turns over but fails to start?
- J
  James ReidSep 1, 2025
  If your Polaris Utility Vehicle engine turns over but fails to start, try the following: * Refuel if you are out of fuel. * Drain the fuel system and refuel if water is present in the fuel. * Replace with fresh recommended fuel if the fuel is old or non-recommended. * Inspect plugs and replace if necessary if spark plugs are fouled or defective or there is no spark to spark plug. * Recharge the battery to 12.8 VDC if the voltage is low.
M
mblackwellSep 3, 2025
Why does my Polaris Utility Vehicle engine backfire?
- K
  Keith MccallSep 3, 2025
  Your Polaris Utility Vehicle engine might backfire due to: * A weak spark from the spark plug. Inspect, clean and/or replace spark plugs. * Incorrect spark plug gap or heat range. Set gap to specs or replace plugs. * Old or non-recommended fuel. Replace with fresh recommended fuel. * Water present in fuel. Replace with fresh recommended fuel. * Loose ignition connections. Check all connections and tighten.
J
Jeffrey SmithSep 7, 2025
Why does my Polaris Offroad Vehicle engine backfire?
- A
  Alicia LopezSep 7, 2025
  If your Polaris Offroad Vehicle engine backfires, it could be due to a weak spark from the spark plug (inspect, clean and/or replace spark plugs), incorrect spark plug gap or heat range (set gap to specs or replace plugs), old or non-recommended fuel (replace with fresh recommended fuel), incorrectly installed spark plug wires (see your dealer), incorrect ignition timing (see your dealer), mechanical failure (see your dealer), loose ignition connections (check all connections and tighten), or water present in fuel (replace with fresh recommended fuel).
T
Toni WaltersSep 9, 2025
Why does my Polaris Offroad Vehicle engine ping or knock?
- O
  Oscar RodriguezSep 9, 2025
  If your Polaris Offroad Vehicle engine pings or knocks, it could be due to poor quality or low octane fuel (replace with recommended fuel), incorrect ignition timing (see your dealer), or incorrect spark plug gap or heat range (set gap to specs or replace plugs).