123
MAINTENANCE
Cleaning and Storage
Storage Tips
Clean the Exterior
Make any necessary repairs and clean the vehicle as recommended. See
page 120.
Stabilize the Fuel
1. Fill the fuel tank.
2. Add Polaris Carbon Clean Fuel Treatment or Polaris Fuel Stabilizer.
Follow the instructions on the container for the recommended
amount.
NOTE: Carbon Clean removes water from fuel systems, stabilizes fuel and
removes carbon deposits from pistons, rings, valves and exhaust sys-
tems.
3. Allow the engine to run for 15-20 minutes to allow the stabilizer to
disperse through the entire fuel delivery system.
Oil and Filter
Change the oil and filter. See page 84.
Air Filter / Air Box
Inspect and clean or replace the pre-filter and air filter. See page 101.
Clean the air box. Drain the sediment tube.
Fluid Levels
Inspect the fluid levels. Add or change fluids as recommended in the
Periodic Maintenance Chart beginning on page 75.
• Demand drive fluid (front gearcase)
• Rear gearcase fluid
• Transmission fluid
• Brake fluid (change every two years and any time the fluid looks dark
or contaminated)
• Coolant (test strength/fill)
CAUTION
Starting the engine during the storage period will disturb the protective film
created by fogging and damage could occur. Never start the engine during
the storage period.
To Next Page
Loading...
Need help?
General
