40
FEATURES AND CONTROLS
Seat Belts
This Polaris vehicle is equipped with three-point lap and diagonal seat
belts for the operator and passenger.
To wear the seat belt properly, follow this procedure:
1. Pull the seat belt latch down-
ward and across your chest
toward the buckle at the inner
edge of the seat. The belt should
fit snugly across your hips and
diagonally across your chest.
Make sure the belt is not twisted.
2. Push the latch plate into the
buckle until it clicks.
3. Release the strap, it will self-
tighten.
NOTE: Press the red release latch on
the buckle to release the seat
belt.
WARNING
Riding in this vehicle without wearing the seat belt can result in serious injury
or death in the event of an accident or sudden stop. Always make sure the
seat belts are secured for both the operator and passenger before riding.
Seat Belt
Latches
Seat Belt
Buckles
To Next Page
Loading...
Need help?
General
