98
MAINTENANCE AND LUBRICATION
Lubrication Recommendations
15. Rear Axle
Bearing
L
Grease
**
Locate fittings and grease Every 3
months or
50 hours
16. Swing
Arm
Bushings
L
Grease
**
Locate fittings on swing arm
and grease with grease gun.
Monthly or
at 20
hours
17. Upper
Control Arms
L
Grease
**∆
Locate fittings and grease Semi-
annually
18. Lower
Control Arms
L
Grease
**∆
Locate fittings and grease Semi-
annually
19. Rear
Wheel Hub
Bearing Carri-
er
L
Grease
**∆
Locate fitting and grease Semi-
annually
20. Rear Anti-
Roll Bar
L
Grease
Locate fitting and grease Semi-
annually
L More often under severe use, such as wet or dusty conditions.
**Polaris Premium all Season Grease or grease conforming to NLGI
No. 2, such as Conoco Superlube M or Mobilegrease Special.
+ Grease every 500 miles, or before long periods of storage or after
pressure washing, or after submerging in water. Always use Polaris
Premium U-Joint Lube for maximum service of these driveline
components (PN 2871515 3 oz.)(PN 2871551 14 oz.).
∆ When suspension action becomes stiff or after washing.
NOTE: Hours are based on 10 mph average.
To Next Page
Loading...
Need help?
General
