146
MAINTENANCE AND LUBRICATION
Lights -- Adjustment -- Replacement
Headlight Lamp Replacement
Headlight La mp Replacement - Scrambler
1. Remove wire harness connector from the back of headlight.
2. Grasp bulb housing, turn counterclockwise and remove bulb.
3. Install bulb into headlight housing and rotate clockwise firmly.
NOTE: Bulb is to be positioned so the harness installs into the
lamp at the bottom.
4. Reinstall connector.
Keep your headlights and taillights clean. Poor lighting while riding
can result in an accident causing severe injury or death.
Do not service while headlight is hot. Serious burns may result.
Do not touch a halogen lamp with bare fingers. Oil from your skin
leaves a residue, causing a hot spot which will shorten the life of
the lamp.
WARNING
CAUTION
To Next Page
Loading...
