103
MAINTENANCE AND LUBRICATION
Engine Cooling System
NOTE: Use of a non-standard pressure cap will not allow the
recovery system to function properly. If the cap should need
replacement contact your dealer for the correct replacement part.
To insure that the coolant maintains its ability to protect the engine, it
is recommended that the system be completely drained every two years
and a fresh mixture of antifreeze and water be added.
Polaris recommends the use of Polaris Premium 60/40
anti-freeze/coolant or a 50/50 mixture of high quality aluminum
compatible anti-freeze/coolant and distilled water. NOTE: Polaris
Premium 60/40 is already premixed and ready to use. Do not dilute
with water. NOTE: Always follow the manufacturer’s mixing
recomme ndations for the freeze protection required in your area.
Using a funnel, slowly add coolant as necessary through the radiator
filler neck.
Indicates a potential hazard that could result in serious
injury or death.
WARNING
To Next Page
Loading...
