Polaris
®
AutoClear
®
SC (PAGSC20K) Salt Chlorinator - Installation and Operation
Manual
Table 1. Approximate Pounds and Kilograms of Salt Needed to Obtain 3,000 ppm (4.0 gpl)
Pool Size – Litres (US Gallons)
Table 2. Approximate Pounds and Kilograms of Stabilizer Needed to Obtain 50 ppm
NOTE: Minimum salt level is 3000 parts per million (ppm). Low salt concentration below 2,500 ppm will cause
premature cell failure.
Current
Cyanuric Acid
Level - ppm
Pool Size Litres (US Gallons)
NOTE: The above chart is for general reference only. The recommended stabilizer reading is between 10 - 50
ppm and will vary dependent on geographic climate. Warm, sunny climates will require a stabilizer reading
at the higher end of the given range. Consult your local pool professional for your optimum level. Always add
stabilizer according to manufacturer’s instructions. For indoor pools, it is not necessary to add chlorine stabilizer
to the swimming pool water.