49
THE PERFECT FIT
IQ Rear Suspension Adjustments
Weight Transfer During Acceleration
The preferred method for control-
ling weight transfer during accel-
eration is by adjusting the rear rear
scissor stop (RRSS). The factory
setting is the best for most trail
riding conditions.
To decrease weight transfer under
acceleration (for improved corner-
ing), rotate the RRSS to a higher
position.
To increase weight transfer or ski
lift during acceleration, rotate the
RRSS to a lower position.
NOTE: Your dealer can help you
with initial setup and addi-
tional setup instructions
to help you achieve your
optimum ride. A scissor
stop tool is also available
from your dealer.
HIGH
LOWLOW
MEDIUM
RRSS
FRSS
To Next Page
Loading...
