33
FEATURES AND CONTROLS
Instrument Cluster
Rider Information Center
Accessing Menus and Options
Gauge Settings Menu
Press and release the MODE button to cycle through the Area 1 modes until the desired
default mode displays. See page 32.
Press and hold the MODE button to enter the settings menu.
The OPTIONS screen will display for a few seconds.
1. Press and release either toggle button to cycle to the
desired option.
2. Press MODE to select the option.
3. Press either toggle button to cycle to the desired
setting.
4. Press MODE to save and exit to the settings menu.
5. Press and hold the MODE button to exit the settings menu.
Backlight Color
The information center backlight can be set to either blue
or red.
1. Press and hold the MODE button to enter the settings
menu.
2. Press either toggle button to cycle to the “BL
COLOR” option. Press MODE to select.
3. Press either toggle button to cycle to the desired
setting.
4. Press MODE to save and exit to the settings menu.
Backlight Brightness
The information center backlight can be set to either blue
or red.
1. Press and hold the MODE button to enter the settings
menu.
2. Press either toggle button to cycle to the “BL
LEVEL” option. Press MODE to select.
3. Press “UP” button to increase brightness. Press
“DOWN” button to decrease brightness.
4. Press MODE to select and exit to the settings menu.
To Next Page
Loading...
Need help?
General
