EasyManuals Logo

Polaris Phoenix 200 Quadricycle User Manual

Polaris Phoenix 200 Quadricycle
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
55
MAINTENANCE
Transmission Oil
Always check and change the transmission oil at the intervals outlined
in the Periodic Maintenance Chart beginning on page 48.
Transmission Oil Recommendations
Oil Check
1. Position the vehicle on a level
surface. Place the transmission
in gear. Lock the parking brake.
2. View the oil level through the
sight glass. The oil level should
be between 1/4 and 3/4.
3. Remove the fill plug. Add the
recommended oil as needed.
4. Reinstall the fill plug.
Oil Change
1. Position the vehicle on a level surface. Place the transmission in
gear. Lock the parking brake.
2. Remove the fill plug.
3. Remove the transmission drain plug.
4. Drain the fluid into a drain pan.
5. Clean and reinstall the drain plug. Torque to specification.
6. Add 550 ml of the recommended fluid.
7. Reinstall the fill plug.
8. Check for leaks. Discard used oil properly.
Gearcase Lubricant Capacity Drain Plug Torque
Transmission Premium AGL Synthetic
Gearcase Lubricant
550 ml 24 Nm
1/4
3/4

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris Phoenix 200 Quadricycle and is the answer not in the manual?

Polaris Phoenix 200 Quadricycle Specifications

General IconGeneral
BrandPolaris
ModelPhoenix 200 Quadricycle
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals