Instr 9927476 Rev 01 2016-11 Page 3 of 12
INSTALLATION INSTRUCTIONS
PREPARATION
1. Shift vehicle transmission into “PARK”. Turn key to
“OFF” position and remove from vehicle.
2. Remove the seat by pushing and holding the seat
adjuster lever
C
down. Slide the seat forward until
removed from track guides.
3. Disconnect the black negative (-) cable from
battery FIRST, then disconnect red positive (+)
cable from the battery.
WARNING
ALWAYS disconnect black negative (-) cable from
battery FIRST. Failure to comply will result in a high
current electrical arc, and may result in battery
explosion, if tool touches grounded frame. Death or
serious personal injury may occur.
4. Rotate two latches
B
and open the front storage
bin cover
A
.
To Next Page
Loading...
