81
MAINTENANCE
Seat Belts
Inspect all three seat belts for proper operation before each use of the
vehicle.
1. Push the latch plate into the buckle until it clicks. The latch plate
must slide smoothly into the buckle. A click indicates that it's
securely latched.
2. Push the red button in the middle of the buckle to make sure it
releases freely.
3. Check the belt webbing for wear, cuts or damage. If any irregulari-
ties are found, have the seat belt system checked and/or replaced by
an authorized Polaris dealer.
The RANGER seat belt is
adjustable and should be
adjusted for both the operator
and passengers before driving.
Although having the belt at 30°
is typical for many people, it
will not accommodate all body
sizes and shapes. Make sure the
seat belt is adjusted to the low-
est possible lap position before
riding.
1. To adjust, loosen the bolts.
2. Reposition both the buckle
and retractor. Tighten the
bolts.
NOTE: The center belt does not self adjust. Before riding, pull on the strap to
secure the belt on the lap of the center passenger.
WARNING
Failure to follow the age recommendations for this vehicle could result in
serious injury or death. No one under the age of 16 may operate this vehicle.
No one under the age of 5 may ride as a passenger in this vehicle.
To Next Page
Loading...
Need help?
General
