74
MAINTENANCE
Gearcases
Front Gearcases
Always check and change the front gearcase oil at the intervals outlined
in the Periodic Maintenance Chart beginning on page 62. Maintain the
oil level even with the bottom thread of the fill plug hole.
Refer to the Gearcase Specifications Chart on page 72 for recommended
lubricants, capacities and torque specifications. See page 112 for the
part numbers of Polaris products.
The front gearcase fill plug is located on the right side of the front gear-
case.
Oil Check
1. Position the vehicle on a level surface.
2. Remove the fill plug. Check the oil
level.
3. Add the recommended oil as needed.
4. Reinstall the fill plug. Torque to spec-
ification.
Oil Change
1. Support the vehicle securely with a
jackstand.
2. Remove the front tire on the driver's
side.
3. Remove the fill plug.
4. Place a drain pan under the drain plug
on the bottom right-hand side.
5. Remove the drain plug. Drain the oil. Discard used oil properly.
6. Clean the drain plug. Reinstall the drain plug. Torque to specifica-
tion.
7. Add the recommended oil.
8. Reinstall the fill plug. Torque to specification.
9. Check for leaks.
To Next Page
Loading...
Need help?
General
