EasyManuals Logo
Home>Polaris>Utility Vehicle>Ranger 4X4

Polaris Ranger 4X4 User Manual

Polaris Ranger 4X4
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
57
MAINTENANCE
Engine Oil
Always check and change the oil at the intervals outlined in the Periodic
Maintenance Chart beginning on page 50. See page 56 for oil recom-
mendations.
Oil Check
The oil tank is located under
the seat.
1. Position the vehicle on a
level surface.
2. Apply the brakes. Start the
engine and allow it to idle
for 20-30 seconds. Stop the
engine.
3. Remove the seat. See page
27.
4. Remove the dipstick. Wipe
it dry with a clean cloth.
5. Reinstall the dipstick.
Screw it in completely.
Tip: The dipstick must be screwed
in completely to keep the
angle and depth of the stick
consistent.
6. Remove the dipstick. Make sure that the oil level is between the full
and add marks. Add oil if necessary. Do not overfill.
Tip: A rising oil level between checks in cool weather driving can indicate mois-
ture collecting in the oil reservoir. If the oil level is above the full mark,
change the oil.
Add
{
Safe Range
Full

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris Ranger 4X4 and is the answer not in the manual?

Polaris Ranger 4X4 Specifications

General IconGeneral
BrandPolaris
ModelRanger 4X4
CategoryUtility Vehicle
LanguageEnglish

Related product manuals