EXTREME USE 30 AH BATTERY (NON-EPS MODELS
ONLY)
If your factory-installed battery cannot maintain a charge because of operation in
extreme cold or with multiple electrical accessories, you may need to purchase a
30 AH battery and a battery strap bracket. Your POLARIS dealer can assist.
Your dealer can provide any installation procedures that may differ for an
extreme use battery. See page 92 for the part numbers of POLARIS products.
1. Fully charge the new battery before installing it.
2. To install the 30 AH battery, remove the existing battery.
3. Remove the plastic spacer at the bottom of the battery compartment. Save
the spacer for future use.
4. Install the new battery.
42
FEATURES AND CONTROLS
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
