23
FEATURES AND CONTROLS
Console
Gear Selector
H: High Gear
L: Low Gear
N: Neutral
R: Reverse
P: Park
Low gear is the primary driving range for the
RANGER. High gear is intended for use on hard-
packed surfaces with light loads. Whenever the
vehicle is left unattended, always place the
transmission in PARK.
To change gears, stop the vehicle, and with the
engine idling, move the lever to the desired gear.
Do not attempt to shift gears with engine speed
above idle or while the vehicle is moving.
Tip: Maintaining shift linkage adjustment is important to assure proper transmission function. See your
dealer if you experience any shifting problems.
NOTICE: Shifting gears with the engine speed above idle or while the vehicle is moving could cause
transmission damage. Always shift when the vehicle is stationary and the engine is at idle.
Using Low Range
Always shift into low gear for any of the following conditions.
• Operating in rough terrain or over obstacles
• Loading the vehicle onto a trailer
• Towing heavy loads
To Next Page
Loading...
