38
OPERATION
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating condition before operating
increases the risk of an accident. Always inspect the vehicle before each use to make sure it's
in safe operating condition.
Item Remarks Page
Brake system/pedal travel Ensure proper operation 26, 76
Brake fluid Ensure proper level 76
Park gear Ensure vehicle does not roll when in PARK. Ensure
PARK light illuminates.
-
Front suspension Inspect, lubricate if necessary 63
Rear suspension Inspect, lubricate if necessary 63
Steering/steering lock Unlock the steering; ensure free operation 77
Tires Inspect condition and pressure 78
Wheels/fasteners Inspect, ensure fastener tightness 78
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 27, 64
Coolant level Ensure proper level 70
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation 26
Indicator lights/switches Ensure operation -
Air filter, pre-filter Inspect, clean 74
Headlamp Check operation, apply POLARIS dielectric grease
when lamp is replaced
80
Brake light/tail lamp Check operation, apply POLARIS dielectric grease
when lamp is replaced
81
Turn Signals Ensure operation of all signal lamps 25
Mirrors Adjust for best side/rear vision 27
Horn Ensure operation 24
Seat Belts Check length of belt for damage, check latches for
proper operation
29
Cab Nets Check for wear or damage, ensure proper installation 30
Riding gear Wear approved helmet, goggles and protective clothing 8
To Next Page
Loading...
Need help?
General
