DRIVE MODE INDICATOR
The Drive Mode Indicator displays the active
drive mode. The Drive Mode Indicator will
match the information displayed in the Rider
Information Center. An amber light flashes
when drive mode selection is pending. Once
in the selected drive mode, a solid amber
light will show next to the active drive mode.
ACTIVE DESCENT CONTROL (ADC) SYSTEM (IF
EQUIPPED)
The ADC system allows engine braking to all four wheels when the vehicle
descends a hill or incline.
• Always operate in low gear and engage ADC 4X4 when transporting heavy
loads and/or when towing.
• Always operate in low gear and engage ADC 4X4 before ascending or
descending a hill.
ENGAGING ACTIVE DESCENT CONTROL
The ADC system will automatically engage when both of the following conditions
occur:
• The drive mode must be in the ADC 4X4 position.
• The transmission must be in gear (high, low or reverse).
DISENGAGING ACTIVE DESCENT CONTROL
The ADC system will automatically disengage if at least one of the following
conditions occur:
• The drive mode is changed from the ADC 4X4 position.
• The transmission is shifted to neutral or park.
69
OPERATION
To Next Page
Loading...
Need help?
General
