6. Reinstall the air filter (if clean) or install a new air filter (if soiled). Do not
attempt to clean the air filter.
NOTICE
Use of a non-POLARIS-approved air filter may cause engine damage. Always
use a POLARIS-approved replacement filter. See page 92 for the part numbers
of POLARIS products.
7. Make sure the filter is fully seated on the intake boot and that there is no gap
between the filter and boot after installation. Tighten the worm gear clamp to
24 in. lbs. (2.7 Nm).
8. Reinstall the air box cover. Make sure both hinges are fully inserted. Secure
the cover clips.
107
MAINTENANCE
To Next Page
Loading...
