SUSPENSION ADJUSTMENT
Adjust the front and rear shock absorber springs by rotating the adjustment cam
either clockwise or counter-clockwise to increase or decrease spring tension.
Always heed the following rules if you make adjustments to this suspension.
• Always return the suspension to the lowest (softest
q
) setting after the load is
removed from the vehicle. The increased suspension height will negatively
impact vehicle stability when operating without a load.
• Always apply the same adjustment setting to both rear wheels.
• Never operate the vehicle on the highest (stiffest
w
) or second highest
preload settings without a total combined payload in the vehicle of 450 lbs.
(204 kg) or more. Payload includes the driver, approved accessories and
cargo. Never exceed the stated load capacity for this vehicle.
112
MAINTENANCE
To Next Page
Loading...
Need help?
General
