44
OPERATION
Driving Safely
Driving Procedure
1. Sit in the driver's seat and fasten the seat belt.
2. After starting the engine and allowing it to warm up, apply the ser-
vice brakes, and shift the transmission into gear.
3. Check your surroundings and determine your path of travel.
4. Release the park brake.
5. Keeping both hands on the steering wheel, slowly release the brakes
and depress the throttle with your right foot to begin driving.
6. Drive slowly. Practice maneuvering and using the throttle and
brakes on level surfaces.
7. Do not carry a passenger until you have at least two hours of driving
experience with this vehicle.
NOTE: Low gear is the primary range for operating the RANGER. High gear is
intended for use on hard-packed surfaces with light loads.
To Next Page
Loading...
