Polaris Ranger 6x6 700 EFI 2009 - Front Gearcases

67
MAINTENANCE
Engine Oil
Oil and Filter Change
12. Remove the dipstick and fill the sump with two quarts (1.9 l) of rec-
ommended oil.
13. Shift the transmission to neutral.
14. Apply the brakes. Engage the park brake.
15. Start the engine. Allow it to idle for one to two minutes.
16. Stop the engine. Inspect for leaks.
17. Re-check the oil level on the dipstick and add oil as necessary to
bring the level to the upper mark on the dipstick.
18. Dispose of used filter and oil properly.
Gearcases
Gearcase Specification Chart
Gearcase Lubricant Capacity Fill Plug
To r q u e
Drain Plug
To r q u e
Main Gearcase
(Transmission)
Premium AGL
Synthetic
Gearcase Lube
15.2 oz.
(450 ml)
14 ft. lbs.
(19.4 Nm)
14 ft. lbs.
(19.4 Nm)
Front Gearcase Premium Demand
Drive Hub Fluid
5 oz.
(150 ml)
8-10 ft. lbs.
(11-13.6 Nm
11 ft. lbs.
(15 Nm)
Middle Gearcase Premium ATV
Angle Drive Fluid
6.75 oz.
(200 ml)
14 ft. lbs.
(19.4 Nm)
14 ft. lbs.
(19.4 Nm)
Rear Gearcase Premium ATV
Angle Drive Fluid
10 oz.
(300 ml)
14 ft. lbs.
(19.4 Nm)
14 ft. lbs.
(19.4 Nm)