70
MAINTENANCE
Gearcases
Rear Gearcase (6X6)
Always check and change the rear gearcase oil at the intervals outlined in the Periodic
Maintenance Chart beginning on page 59.
Refer to the Gearcase Specifications Chart on page 65 for recommended lubricants,
capacities and torque specifications. See page 100 for the part numbers of POLARIS
products.
The rear gearcase fill plug is on the driver's side of the rear gearcase.
Oil Check
Maintain the oil level even with the bottom thread
of the fill plug hole.
1. Position the vehicle on a level surface.
2. Remove the fill plug. Check the oil level.
3. Add the recommended oil as needed.
4. Reinstall the fill plug. Torque to specification.
Oil Change
1. Remove the fill plug.
2. Place a drain pan under the drain plug.
3. Remove the drain plug. Allow the oil to drain completely.
4. Clean and reinstall the drain plug. Torque to specification.
5. Add the recommended oil.
6. Reinstall the fill plug. Torque to specification.
7. Check for leaks. Dispose of used oil properly.
Fill
Plug
Drain Plug
To Next Page
Loading...
Need help?
General
