EasyManuals Logo

Polaris Ranger crew 800 EFI User Manual

Polaris Ranger crew 800 EFI
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #89 background imageLoading...
Page #89 background image
87
MAINTENANCE
Battery
Battery Removal
Improperly connecting or disconnecting battery cables can result in an explosion and cause serious
injury or death. When removing the battery, always disconnect the negative (black) cable first. When
reinstalling the battery, always connect the negative (black) cable last.
1. Remove the seat. Remove the storage bin.
2. Remove the screws from the battery hold-
down strap and remove the strap.
3. Disconnect the black (-) battery cable first.
4. Disconnect the red (+) battery cable last.
5. Lift the battery out of the vehicle. Be
careful not to tip a conventional battery
sideways, which could spill electrolyte.
NOTICE: If electrolyte spills, immediately wash it
off with a solution of one tablespoon
baking soda and one cup water to
prevent damage to the vehicle.
WARNING
Hold-Down Strap

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris Ranger crew 800 EFI and is the answer not in the manual?

Polaris Ranger crew 800 EFI Specifications

General IconGeneral
BrandPolaris
ModelRanger crew 800 EFI
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals