1. Lift the hood.
CAUTION
Escaping steam can cause burns. Never remove the pressure cap while the
engine is warm or hot. Always allow the engine to cool before removing the
pressure cap.
2. Slowly remove the radiator cap
q
.
3. View the coolant level through the opening.
4. Use a funnel and slowly add coolant as needed.
TIP
This procedure is required only if the cooling system has been drained for
maintenance and/or repair. But if the overflow bottle
w
has run dry, the level in
the radiator should also be inspected.
5. Reinstall the pressure cap. Use of a non-standard pressure cap will not allow
the recovery system to function properly. Your POLARIS dealer can provide
the correct replacement part.
119
MAINTENANCE
To Next Page
Loading...
Need help?
General
