ITEM REMARKS REF.
Tires Inspect condition and pressure page 131
Wheels/fasteners Inspect, ensure fastener tightness page 131
Frame nuts, bolts,
fasteners
Inspect, ensure tightness
–
Fuel and oil Ensure proper levels page 47
page 104
Coolant level Ensure proper level page 120
Coolant hoses Inspect for leaks
–
Throttle Ensure proper operation
–
Indicator lights/switches Ensure proper operation page 39
Intake pre-filters Inspect, clean page 126
Headlamps Check operation, apply POLARIS
dielectric grease when lamp is replaced
page 136
Brake light/tail lamps Check operation
–
Seat Latch Push down on the seat back to ensure the
latch is secure
page 43
Seat Belt Check length of belt for damage, check
latches for proper operation
page 43
Cab Doors (If equipped) Check doors and latches for wear or
damage.
page 45
Riding Gear Wear approved helmet, goggles, and
protective clothing
STARTING THE ENGINE
1. Position the vehicle on a level surface outdoors or in a well ventilated area.
2. Sit in the driver's seat and fasten the seat belt. Secure the cab nets.
3. Place the transmission in PARK and apply the PARKING BRAKE (if
equipped).
4. Apply the brakes. Do not press the throttle pedal while starting the engine.
5. Turn the ignition key past the ON/RUN position to START. Engage the starter
for a maximum of five seconds. Release the key when the engine starts.
69
OPERATION
To Next Page
Loading...
Need help?
General
