33
FEATURES AND CONTROLS
Switches
Ignition Switch/Light Switch (Base Model)
Use the ignition switch to start the engine and to turn the lights on or off.
The key can be removed from the switch when it is in the OFF position.
Ignition Switch (LE Model)
The ignition switch is a three-position, key-operated switch. The key
can be removed from the switch when it is in the OFF position.
Light Switch (LE Model)
The ignition switch key must be in the
ON/RUN position to operate the
headlights. Press the top of the rocker
switch toward the dash to place the
headlights on high beam. Move the
rocker switch to the center position to
place the headlights on low beam. Press
the bottom of the rocker switch to turn off
the headlights.
OFF Turn the key to the OFF position to stop the engine. Electrical
circuits are off.
LIGHTS ON Electrical circuits are on. Electrical equipment can be used.
LIGHTS OFF Electrical circuits are on. Electrical equipment can be used.
START Turn the key to the START position to engage the electric
starter. See page 56 for starting procedures.
OFF The engine is off. Electrical circuits are off, except Acc, 12V.
ON Electrical circuits are on. Electrical equipment can be used.
START Turn the key to the START position to engage the electric
starter. The key returns to the ON position when released.
HIGH
OFF
LOW
To Next Page
Loading...
