ALL WHEEL DRIVE (AWD) SWITCH
The AWD Switch has two positions:
q
All Wheel Drive (AWD)
w
Two Wheel Drive (2WD)
Press the top of the rocker switch to engage All Wheel Drive. Press the bottom
of the switch to operate in two wheel drive. See the All Wheel Drive (AWD)
System section for AWD operating instructions.
REMOTE WINCH SWITCH (IF EQUIPPED)
Pull the remote winch switch and cable
out from the dash storage area. Press
and hold the left side of the switch to
spool line out from the winch. Press and
hold the right side of the switch to spool
line in the winch. Release the switch
and it returns to the center “OFF”
position to stop spooling.
36
FEATURES AND CONTROLS
To Next Page
Loading...
