NOTICE
When the gauge is displaying a fault code, the warning telltale (check engine
or EPS) will blink to indicate which controller set the fault code.
3. To exit the Options Menu the user can select Exit Menu function from
Options Menu, can hold Mode Button and exit out of Options Menu, or not
press any button for 10 seconds, which will exit out of the Options Menu.
ADVANCED MENU (IF EQUIPPED)
From the Advanced menu (if
equipped) you can set the
maximum speed, enable and
disable a geofence, and more.
For a full list of available
options see below.
ADVANCED MENU NOTES
Maximum Speed Set maximum Speed
Geofence Enable/Disable Geofence
Inside Geofence Speed Set inside Geofence maximum
vehicle speed
Outside Geofence Speed Set outside Geofence maximum
vehicle speed
Change PIN (if equipped) Change PIN
Exit Advanced Menu Exit
55
FEATURES AND CONTROLS
To Next Page
Loading...
