41
FEATURES AND CONTROLS
Passenger Seat
Always make sure the passenger seat lock-out is functioning properly
before operating with a passenger.
Do not operate the vehicle with the seat in the 2-up position when
operating without a passenger. Always return the seat to the 1-up
position for single-rider operation.
Never carry cargo in the rear box when operating the ATV in the 2-up
mode with a passenger.
Seat Conversion
1. Make sure the cargo box dump latch is securely latched. See page
77.
2. Slide the seat latch levers inward to release the locks.
3. Tilt the backrest slightly forward.
4. Pull the passenger backrest upward from the bed of the cargo box.
Passenger
Backrest
Release Locks
Operator Backrest
Latches
To Next Page
Loading...
