38
FEATURES AND CONTROLS
Light Switches
The light switch is located on the
left handlebar (1). It’s used to turn
the lights on and off.
NOTE: The lights won’t work
unless the key is in the ON position
and the shut-off switch is i n the
RUN position.
Indicator Lights
With the engine running, verify the function of all indicator lights each
time the ATV is used.
NOTE: The taillight is on whenever the main switch (key) is on.
Turn the key off to prevent battery drain.
1. Transmission Neutral Indicator
2. Transmission Reverse Indicator
3. Oil Warning (indicates a low oil level.
Operating the ATV on streets or roads, especially in darkness,
could result in an accident and serious injury or death.
Your ATV is not equipped with highway-approved lights. It’s
designed for and must be used for off-road use only.Use
caution and drive at reduced speeds in conditions of reduced
visibility such as fog, rain and darkness.
WARNING
1
1
3
2
To Next Page
Loading...
