40
FEATURES AND CONTROLS
Brake Lever
The front and rear brakes are applied by
squeezing the brake lever (1) toward the
handlebar. The front and rear brakes are
hydraulically activated disc type brakes
that are activated by only one lever.
Always test brake lever travel and master
cylinder fluid level before riding. When
squeezed, the lever should feel firm. Any sponginess would indicate a
possible fluid leak or low master cylinder fluid level, which must be
corrected before riding. Contact your dealer for proper diagnosis and
repairs.
1
Operating the ATV with a spongy brake lever can result in loss
of braking, which could cause an accident. Never operate the
ATV with a spongy-feeling brake lever .
WARNING
To Next Page
Loading...
