52
FEATURES AND CONTRO LS
Instrument Cluster
Rider Information Center
The reverse override button on the left handlebar is also the mode
button. Use the mode button t o toggle t hrough the four (4) standard
modes of the rider i nformation center.
NOTE: The transmission cannot be in reverse.
Mode 1 - Odometer
The odometer records the total distance t raveled by the vehicle since
manufacture.
Mode 2 -Trip Meter
The trip meter records the distance traveled on each trip if it’s reset
before each trip. To reset the trip meter, select the trip meter mode.
Press and hold the mode button (override button) until the total
changes to 0.
NOTE: The trip meter displays a decimal point, but the odometer
does not.
Mode 3 - Hour Meter
The hour meter l ogs the total hours the engine has been in operation.
Mode 4 - Tachometer
The tachometer displays engine RPM. Sm all fluctuations in the RPM
are normal due to changes in humidity, temperature and elevation.
To Next Page
Loading...
