73
MAINTENANCE AND LUBRICATION
Transmission Oil Change
1. Position the vehicle on a
level surface.
2. Place the transmission in
gear.
3. Lock the mechanical
parking brake.
4. Loosen the jam nut (1).
5. Turn the adjuster bolt (2)
inward.
6. Remove the drain plug (3).
Wipe it clean.
7. Drain the fluid into a drain pan.
8. Install a new sealing washer.
Reinstall the drain plug.
=19 N-m
9. Turn the adjuster bolt outward
until it touches the frame, and
then turn an additional 1/2 turn.
10. Tighten the jam nut securely
while holding the adjuster bolt.
11. Remove the dipstick.
12. Add 335 ml of the recommended fluid.
13. Reinstall the dipstick.
14. Check for oil leaks.
FNR
1
2
3
To Next Page
Loading...
