54
OPERATION
Pre- Operation Check
n Fuel And Oil Tank Levels
Remove fuel cap. With watercraft horizontal and fuel valve off (if
equipped), fill the fuel tank with gasoline recommended on pages
8-14 of this manual. Heed the warnings about gasoline found on page
49.
NOTE: If the fuel or oil levels become low, the Multi-Function
Instrument will display a flashing warning light. Proceed to shore and
refuel. Refer to the specifications found on pages 8- to determine if
your boat is equipped with this feat ure. Know your machine before
riding.
To check the oil level, turn the
cap counterclockwise and
remove it to look inside the oil
tank. You can also remove the
storage tray inside the storage
compartment or seat to view
the oil level in t he oil tank. Add
recommended oil as necessary.
Visually inspect the oil for
water or other contaminants. If
either of these is present, have
the oil changed and bleed the
system to remove all
contaminants.
Read the oil recommendations
found on page 65 for proper
lubrication during the break-in
period.
Oil Fill Cap
To Next Page
Loading...
Need help?
General
