14
EN
2.7 I Good prac ces a er each cleaning opera on
2.7.1 Clean the fi lter as soon as the appliance is out of the pool
• The cleaner's performance may be reduced if the fi lter is full or dirty.
• Clean the fi lter in clean water as soon as the appliance is removed form the pool a er each
cleaning cycle. Do not wait for the debris to dry.
• A er each cleaning cycle, follow the steps for cleaning the lter, see “3.2 I Cleaning the fi lter as soon as the appliance
is out of the pool”.
2.7.2 Lay out the cable to reduce tangling
The cleaner's behaviour is strongly impacted by the tangling of the cable. A cable that is correctly untangled will
guarantee be er coverage of the pool.
• Untangle the cable and lay it out in the sun so that it returns to its original shape.
2.7.3 Store the cleaner and cable
• Place the cleaner ver cally at the loca on provided on the trolley (depending on the model) for it to dry out quickly.
Roll up the cable carefully and place it on the trolley handle (see gure
).
• Store all elements away from direct sunlight, humidity, bad weather, and out of reach of any splashes. A protec ve
cover is available as an op onal extra (see gure
).
Tip:
Even if you do not own a trolley, the cable must s ll be carefully arranged for storage. Once rolled up, the
cable can be placed on a wall mount for example.
To Next Page
Loading...
Need help?
General
