8
EN
❷ Use
2.1 I Immersing the cleaner
• Roll out the full length of the cable alongside the pool to avoid the cable becoming tangled during immersion
(see gure
).
• Place the cleaner ver cally into the water (see gure ).
• Move it slightly in all direc ons so that the air contained in the cleaner escapes (see gure ).
• It is essen al that the appliance sinks on its own and se les on the pool oor. While it is immersed, the cleaner draws
the length of cable it needs into the pool (see gure
).
2.2 I A achment to the base (according to model)