Fuel / Exhaust
4.31
Cable Adjustment
Throttle / Choke Cable Inspection
1. Check for smooth throttle opening and closing in all
handlebar positions. Throttle operation should be
smooth and lever must return freely without binding.
2. Inspect cable for proper routing, kinks, or damage.
3. Inspect both ends of cable and replace if frayed, kinked
or damaged.
Throttle Cable Adjustment
1. On models equipped with inline adjusters, loosen the
lock nut.
2. T urn the adjuster in (clockwise) to increase the amount
of throttle lever freeplay. T urn the adjuster out
(counterclockwise) to decrease the amount of freeplay.
3. T ighten locknut securely when adjustment is complete.
CAUTION:
Never operate the engine for more than 15 seconds with-
out cooling water. Severe engine damage may occur from
overheating.
Throttle Lever Free Play
Throttle Lever Freeplay
.020 - .060² (.5 - 1.5 mm)
Lock Nut
Adjuster
Throttle Cable
To Next Page
Loading...