Do you have a question about the Polaroid 200 Series and is the answer not in the manual?
Brand | Polaroid |
---|---|
Model | 200 Series |
Category | Digital Camera |
Language | English |
Explains the structure and operation of Polaroid Land pack camera film packs.
Details the system for processing negative and positive film using rollers and bars.
Describes the camera's focusing mechanism, linkage, and coupling to RF/VF.
Details the two types of lenses (duplet and triplet) used in pack cameras.
Explains the internal configuration and function of the camera's image sizer.
Covers the operation of Polaroid's RF/VF system, including viewfinder mechanics.
Describes the Zeiss Ikon RF/VF, its single-window design, and operation.
Introduces mechanical and electronic timers integrated into 300 line cameras.
Focuses on the Model 268 flashgun, its components, and power sources.
Outlines the procedure for testing shutter battery voltage using a repair tester.
Describes testing the shutter release button height for proper operation.
Explains how to measure the accuracy of electronic and mechanical timers.
Explains testing lens and RF/VF alignment as a pair.
Details testing RF/VF parallax after lens and sizer collimation.
Provides instructions for testing the Model 268 flashgun using a tester.
Lists common picture issues, their probable causes, and corrective actions.
Troubleshooting chart for electronic timer problems like battery issues, dead timer, or inaccurate timing.
Troubleshooting chart for mechanical timer problems such as inaccuracy or worn parts.
Troubleshooting chart for bad film spreads, covering rollers and bars.
Troubleshooting chart for RF/VF issues like missing images or sticky parts.
Troubleshooting chart for general camera problems not covered elsewhere, like shutter or focus issues.
Troubleshooting chart for inoperative Model 268 flashguns, covering battery and connection issues.
Addresses flash attachment inoperability, potentially due to camera battery or PC contacts.
Details conversion steps for cameras with "AA" serial numbers, including part replacement.
Provides procedures for removing and replacing the camera's rear door assembly.
Provides detailed steps for removing and replacing the camera's shutter housing.
Explains how to remove and replace the front lens assembly on various camera models.
Details the procedure for removing and replacing the rear lens assembly.
Details the removal and replacement of the camera's focus bar.
Covers adjustments for RF/VF and image sizer alignment and parallax.
Provides detailed steps for collimating triplet lenses.