Need help?Do you have a question about the Polaroid 636AF and is the answer not in the manual?
General| Film Format | Polaroid 600 film |
|---|---|
| Aperture | f/11 |
| Flash | Built-in |
| Viewfinder | Direct optical viewfinder |
| Type | Instant Camera |
| Lens | Fixed-focus plastic lens |
| Focus Range | 4 ft (1.2 m) to infinity |
Procedure for disassembling the camera's strobe components.
Procedure for reassembling the camera's strobe components.
Procedure for disassembling the camera's apron.
Procedure for disassembling the camera's close-up lens assembly.
Procedure for reassembling the camera's close-up lens assembly.
Procedure for disassembling the main camera body components.
Procedure for reassembling the main camera body components.
Procedure for disassembling the camera's shutter mechanism.
Procedure for reassembling the camera's shutter mechanism.
Procedure for disassembling the camera's drive system.
Procedure for reassembling the camera's drive system.
Procedure for disassembling the door and spread system.
Final steps to complete the camera's reassembly.
Visual checks for obvious faults and cosmetic defects.
Checks of camera functions before operational testing.
Performing functional tests using simulators and power supply.
Charts detailing problems, causes, and corrective actions.
Description of the functions of the Star Tester's controls and indicators.
Procedures for testing the Model 636 camera using the Star Tester.
Steps to perform before beginning the camera testing procedures.
Specifies the recommended order for performing the camera tests.
Measures the time between shutter opening and strobe fire.
Measures energy on film plane during ambient exposure.
Measures resultant energy on film plane during graywall exposure.
Measures strobe output in an integrating sphere.
Adjusts the camera for correct flash timing readings.
Adjusts the camera for correct ambient exposure readings.
Adjusts the camera for correct strobe exposure readings.
Procedure for periodic calibration of the Star Tester equipment.
Measures resultant energy on film plane during flash exposure.
Measures energy on film plane during ambient exposure.
Adjusts the camera for correct flash timing aperture readings.
Adjusts the camera for correct flash exposure readings.
Adjusts the camera for correct ambient exposure readings.
Procedure for calibrating the B-600 Tester, including light source and horn.
To Next Page
